top of page

Technical rider

Aerial performance

Stage material: Circus equipment (aerial silks, straps, net, carabiners, spinners, pulley system, ropes) are provided by the artist. For a specail request can be provided also aerial structure, lighting and sound system.

In this case you can download a techical scheme here

If you have your own place, lights and sound system please read the requierment below:

Playing surface: •The space around fabrics must be not lesss than 3m to 3 m, the floor must be clean.  No passage under the fabric during the service or decorative element. • Before, during and after the performance, the public must not have access to the fabric

An attachment point: • The place where the service will take place must be equipped with a hanging point (beam, ring, frame, etc.) capable of supporting a load of at least 350 Kg CMU (maximum useful load) • Around the attachment point, allow a minimum distance of 50 cm from the projectors or other source heat (even when the fabric is unused) • Ideal height of the hanging point is between 6 to 8 meters. The minimum height is 5m.

Rigging: Can be provided by artist or costumer

Sound equipment: PA system to be provided by the organizer (CD or MP3 audio support provided by the artist).

Light material: To be provided by the organizer / front and back, bluish atmosphere, subdued atmosphere for the start of the issue. For the aerial net it is necessary to have a lighting from the top

Technicians: The organizer is asked to provide a ladder or carrycot on the day of installation equipment, as well as a local person if the assembly requires it

Light management: to see with the lighting technician of the place

Sound management: to do with the sound technician (the music consists of only one track)

Lodge: A dressing room and a 3m2 space for the artist to warm up.

Assembly time: 30 minutes

Artist preparation time: 1-2h (warm-up, makeup)

 

The stage: The stage area must be not less than 4 m to 3 m. It must be clear of all objects.  All backdrops and curtains have to be inflammable. The stage surface must be flat, clean splinter free, ice free and dry.

Lighting: The Fire show performances are the most effective in an darkness, eventually in a mild colour light. Soft lighting can be used, mainly blues, purples, reds and oranges.

Security system: there must b e security fire extinguishers 

Sound equipment: PA system to be provided by the organizer (CD or MP3 audio support provided by the artist).

Artist preparation time: 1-2h (warm-up, makeup)

Sound equipment: PA system to be provided by the organizer (CD or MP3 audio support provided by the artist).

Fire performance
Led acts
 

The stage: The stage area must be not less than 4 m to 4 m. It must be clear of all objects. The stage surface must be flat, clean splinter free, ice free and dry.

Lighting: The Led tanoura show is better in very soft light , using blue , yellow, purple and orange colours

Sound equipment: PA system to be provided by the organizer (CD or MP3 audio support provided by the artist).

Artist preparation time: 1 h (dressing, makeup) 

Sound equipment: PA system to be provided by the organizer (CD or MP3 audio support provided by the artist).

Dance, magic, illusion, 

Surface: •The stage space ;ust be not less than 3m to 3m; the floor must be clean. 

Sound equipment: PA system to be provided by the organizer (CD or MP3 audio support provided by the artist).

Light management: to see with the lighting technician of the place

Sound management: to do with the sound technician 

Lodge: A dressing room and a 3m2 space for the artist to warm up.

Artist preparation time: 1-2h (warm-up, makeup) 

©Captain Anika

  • Wix Facebook page
  • YouTube Classic
bottom of page